TNC-910H toroidal winding machine controller

main feature:

• Adopting single-chip microprocessor design, with stronger functions, smaller size, and strong anti-interference ability
• The memory uses FLASH ROM, which has a large capacity and can store 1000-step winding data. Each step can be individually set for 9 winding data and 5 function options. The winding data will not be lost after the power is turned off.
• The operation and operation mode can be changed for different models and use occasions, and the scope of use is wider
• The winding shaft provides 100 selections of winding speed, and the high speed and low speed of each step can be set separately
• The winding shaft provides 100-step acceleration slope selection to make the winding shaft run more smoothly
• The spool stepper motor driver is driven by a constant current to provide high-speed, high-torque, and high-precision positioning
• The position of the arranging axis can be set by teaching or buttons, and the current position of the arranging axis can be displayed in the data display window
• The winding shaft provides 99-segment positioning speed selection
• With power-off memory function, the power is suddenly interrupted during the winding process, and the current state and parameters can be recorded and saved. When the power is turned on, the product will continue to be wound after it is turned on to reduce the waste of raw materials.
• A set of editing password settings to prevent the setting data from being changed arbitrarily
• Strong compatibility, can directly replace the same type of controller
• The power supply can be divided into AC 100～120V and 220V～240V models for selection

Basic parameters:

• Panel display: digital tube display
• Spool motor type: DC brushless
• Winding shaft motor power: 400W/600W/750W
• Winding shaft speed: 100～3000/6000rpm
• Cable shaft motor: 2A two-phase hybrid stepping motor/external motor driver
• Power supply voltage: AC220V/110V±10%
• Chassis size: 250mm*240mm*132mm